news aggregator
Are wooden props more safer?
I was told by instructor that wooden props are more safer than nylon black props, want to fill me in this fact?...
Categories: RCUniverse
Please check my list -Need help in what to buy for beginner.
Hi Guys, Below is a list of what I plan on buying, based on the info I picked up from you guys, in order to start out. Please let me know what I'm lea...
Categories: RCUniverse
Curious P-51 - Who makes it? Great looking warbird!
I stumbled across this on ebay, do you all have any idea who makes this? It appears to be a well built plane... I am considering buying it! http...
Categories: RCUniverse
Which servo goes where...??
Hey guys i just got my Belt CP and im changing the stock Rx over to my JR Rx and use it with my JR Tx......I dont know which servos plug into which ch...
Categories: RCUniverse
Chinese ARf alu servo mount
Hello, I'm wondering if it is better to mount the servos with or without rubber grommets on "L" shapped servo mounts, looks like they mount it wi...
Categories: RCUniverse
Manual....
Hey today i just got my Esky Belt CP and there was no manual for it, does anyone else with a belt Cp know if it supposed to come with a manual??...
Categories: RCUniverse
sport jet scratch build
I suppose I'm a compulsive designer/scratch builder - just can't seem to help myself. After swapping the P70 in my BobCat for a P120, I needed a home...
Categories: RCUniverse
My first covering job!
Well since I soloed Wed. night, and I won't be flying till next week, I decided to treat my ugly stock Skyraider wings to a facelift. For you new guy...
Categories: RCUniverse
Tiger 60 Build Thread
After the untimely passing of my Tigger 2, I felt the need to have another Tiger in the hangar simply because it was such a great plane to fly. I had...
Categories: RCUniverse
Beginner equiptment?
ok, ill start off by listing everything i have and my plans. i currently have -2 F27B's (my beginner planes) -1 F27...
Categories: RCUniverse
Pic of Full Scale Heli.
Check out what dropped in on us at the Kirk Gray Memorial Pattern Contest in Lake City, S.C. Home to the Flying Tigers. www.flyingtigersrc.com/index....
Categories: RCUniverse
slow stick ailerons?
has anybody found a good way to use the ailerons on a slow stick yet? I think a full house slow sti...
Categories: RCUniverse
Hirobo SRB Quark Forum: Photos Q&A
Hey Pilots! I tough I starterd this forum hoping it will become a good center of information well i just got the Hirobo SRB Quark, got it from a...
Categories: RCUniverse
futaba crystal with jr rx ???
hi everyone, beginner here Q: can i put a futaba rx crystal in my jr reciever ? i just got a futaba 6ex transmitter channel 36. i have a futab...
Categories: RCUniverse
OS FXi 46 Engine cutting off issue
I'm not a total Noob at RC but I have an issue im about to pull my hair out about. I purchased a Nexstar Select Trainer and flew it a few times and th...
Categories: RCUniverse
Cheap lipo's
Anybody ever use these lipo's that are for sell on ebay??? the name is HECELL on the pack. see link below. Are they any good??? do they last???...
Categories: RCUniverse
P-180 vs P-200
The p-200 is slightly wider in diameter. Both weigh the same. Both have the same fuel consumption. I know the P-200 says 45lbs of thrust but what i...
Categories: RCUniverse
P-51A from Top Flite D arc
Hi, here are a few pics of the P-51A in RCAF 400 squadron colors that I built using the TF ARC P-51D kit. Powerd with a Brison 3.2, Robart retracts,...
Categories: RCUniverse
adjust gain on 6 channel
I upgraded to a BlackHawk 450SE Pro which is a 6 channel 3d ready from a Llama V4. On the Llama, you adjusted the gain using a screw. On the BlackHawk...
Categories: RCUniverse
syma 3 channel trim
hey all after crashing my exceed eagle 50 6 chann a few times too many, I decided to get a syma 3 channel with the last order of parts. I LOVE t...
Categories: RCUniverse

