RCU: Electrics
RC Universe Discussion Forums - Discuss RC cars, rc airplanes, rc helis, rc boats, rc jets, rc electric helis, rc electric planes, manufacturer direct support and more. RSS Feed
Updated: 4 min 9 sec ago
Multiplex Mentor
Hi, I am reviewing the Multiplex Mentor. The Mentor is a replacement for the Magister and is a robust trainer and tug (tow plane) made of ELAPOR...
Categories: RCUniverse
Parkzone Spitfire or Hobbyzone Swift
Hello all, I'm looking for my first aileron plane. I've had good practice with aerobird phantom, aerobird 3 and the supercub. Because of price I...
Categories: RCUniverse
SCRATCH BUILDER WANTED B-1 bomber to Nabu Starwars jet
I have a "need". Could be an easy build. this one was done here http://www.lecun.org/hobby/naboo.html http://www.fantastic-plastic.c...
Categories: RCUniverse
Experience with Corona CS929MG Servo ?
Hi, i'm looking for small servo's with metal gear for the Cessna L19 Birddog i'm building. (see attached pics :) ) The first pic shows the stat...
Categories: RCUniverse
Parkzone warp speed!!! Got See...
I got bored today and pulled out a old parkzone pusher plane that I had. I removed the motor and kept the mount to keep the angle of thrust and then m...
Categories: RCUniverse
Spektrum DX6i question
I recently upgraded from a DX6 to a DX6i which I like very much. Sometimes it takes almost 2 minutes for the DX6i to engage the AR6000 receiver....
Categories: RCUniverse
Microjet challenged
Buying a Multiplex Microjet AFR seemed like a good idea. I guess Multiplex figures you will crash it fast becuse it's sold with a cheap speed 400 and...
Categories: RCUniverse
wich rc jet?
i found some really good rc jets that i like but i dont really know wich one to get? http://www.bananahobby.com/1665.html or http://www.bananahobby.co...
Categories: RCUniverse
Motor -Wooden mount question
I made a wooden (birch wood) mount for my outrunner motor. It is firmly glued and the motor is fixed in it by 4 screws in front. Although screws...
Categories: RCUniverse
Very good trainer!
I am a beginner myself and I bought various trainers and one edf jet *hehe*. I found that the Multiplex MiniMag is a great trainer! It is small and on...
Categories: RCUniverse
One ESC For Twin Motors?
Hey Guys, I am trying my first twin motor electric setup and am having a strange problem. I am trying out an inexpensive setup from UnitedHobbies....
Categories: RCUniverse
Balsa Profile search
Looking for a plane to put some old electronics of mine into, A balsa profile like the Oxalys F3A or Reflex from hobby lobby but both seem to stay "ou...
Categories: RCUniverse
Small Pusher Props???
Hi Guys, I have built an F22 Foamie designed for twin pushers and bought two small Brushless 2500Kv outrunners from Unitedhobbies for it. The small...
Categories: RCUniverse
Multiplex Easy Star Float Plane
Has anyone tried to turn their Multiplex Easy Star into a belly floater? From the looks of the plane it is possible to put foam wing floats on and sea...
Categories: RCUniverse
tourqe roll
Hello, I've been trying to get my rhythm bipe foamy to hover, but all I can produce is an extremely fast torque roll. I try to counter it with full...
Categories: RCUniverse
VPX batteries as rcv/CDI power source
Don't know if it has been asked before but does anyone have two VPX batteries (~6.6vdc) wired to either a bank of LM7805 regulators or will a AR62...
Categories: RCUniverse
Electrajet or Stryker?
ive decided for my next plane id like a delta wing, i found a NOS electrajet i can buy for $100 as a deluxe kit, all i will need is my tx, rx, servos,...
Categories: RCUniverse
Holes in spinner base plate and Prop - bigger than Shaft!
HI ALL! I have a EP Rascal 40. The hole in the plastic spinner base plate and the hole in my Prop have been reamed before (for a different plan...
Categories: RCUniverse
Hacker 30-28 installation
I am just getting into RC flying (after retirement)and have a Taylorcraft 450 ready for the motor and ESC but Hacker gives you NO installation informa...
Categories: RCUniverse
covering foam wing
I've been building a speed wing kit. It is a small flying delta 24" span. The wing halves come bare foam the kit recommends using the "Zagi" style c...
Categories: RCUniverse
